Nickel Alloys
INCONEL 718
2.4668
INCONEL 718 alloy is a precipitation-hardened inconel which allows an excellent corrosion resistance to high temperatures and very good mechanical properties (high and low temperatures). This alloy can be delivered in annealed condition to improve the machinability. It has a good weldability and excellent post-welding crack resistance.
We supply Inconel 718 powder for metal additive manufacturing, especially for powder bed technologies in 3D printing (SLS, SLM, FDM, EBM…). These powders comply with UNS N07718, WNR 2.4668
Key benefits
-
Corrosion resistance
-
Good weldability
Standards
AMS 5662
AMS 5596
ASTM B637
Formes disponibles
Diameter
- from 5 to 300 mm
Sur demande
Thicknesses
- from 0,4 to 50 mm
Dimensions
- 1000*2000 mm
Sur demande
Granulometry
- from 15 microns to 60 microns
Sur demande
Diameter
- from 10 mm to 50,8 mm
Thickness
- from 1 mm to 5 mm
Sur demande
Sur demande
Standards
AMS 5662
AMS 5596
ASTM B637
Formes disponibles
Diameter
- from 5 to 300 mm
Sur demande
Thicknesses
- from 0,4 mm to 50 mm
Dimensions
- 1000*2000 mm
Sur demande
Granulometry
- from 15 microns to 60 microns
Sur demande
Diameter
- from 10 mm to 50,8 mm
Thickness
- from 1 mm to 5 mm
Sur demande
Sur demande
Chemical composition
Ni+Co
- 50% min
- 55% max
Cr
- 17% min
- 21% max
Mo
- 2,8% min
- 3,3% max
Cu
- 0% min
- 0,3% max
Co
- 0% min
- 1% max
C
- 0% min
- 0,08% max
Mn
- 0% min
- 0,35% max
Si
- 0% min
- 0,35% max
P
- 0% min
- 0,15% max
S
- 0% min
- 0,15% max
Ti
- 0,65% min
- 1,15% max
Al
- 0,2% min
- 0,8% max
Nb+Ta
- 4,75% min
- 5,5% max
Fe
- —
- Balance
Back
Mechanical properties
Rm (Mpa)
1447
Rp 0,2 (Mpa)
483
Density (g/cm3)
8.19
A (%)
45%
