Titanium
Commercially pure Titanium
Grade 3
Grade 3 titanium is the less used of the four commercially pure grades. Stronger than grade 1 titanium and commercially pure titanium grade 2, its ductility is similar and its formability only slightly less.
We supply commercially pure Titanium powder (Ti CP) Grade 3 for metal additive manufacturing, especially for powder bed technologies in 3D printing (SLS, SLM, FDM, EBM…). These powders meet the ASTM F68 standard.
ACNIS stocks Grade 3 T50 titanium meeting ASTM F67, ISO 5832-2, ASTM B348, ASTM B863, ASTM B265 standards in bars, sheets, powder, tubes…
Key benefits
-
Corrosion resistance
-
Formability
-
Weldability
Standards
ASTM F67
ISO 5832-2
ASTM B348
ASTM B265
ASTM B-863
Formes disponibles
Diameter
- 0.4 mm to 100 mm
Length
- 3000 mm approx.
En stock
Thickness
- 0,4 mm to 120 mm
Dimensions
- Width 1000 to 2000 mm
- Length 1000 to 6000 mm
En stock
Diameter
- 0,32 mm to 10 mm
En stock
Thickness
- from 3 mm
Width
- from 10 mm
Length
- up to 6000 mm
En stock
Standards
ASTM B348
ASTM B265
Formes disponibles
Diameter
- 1 mm to 100 mm
Length
- 3000 mm approx.
En stock
Thickness
- 0,5 mm to 10 mm
Width
- 1000 to 2000 mm
Length
- 1000 to 6000 mm
En stock
Thickness
- from 100m
Width
- On demand
Sur demande
Standards
ASTM B265
AMS 4900
WL 3.7054.1
LN 9297
Formes disponibles
Thickness
- 0,4 mm to 3 mm
Width
- 1000 to 2000 mm
Length
- 1000 to 6000 mm
En stock
Chemical composition
Reference standard : ASTM B348
Fe
- 0% min
- 0,3% max
O
- 0% min
- 0,35% max
N
- 0% min
- 0,05% max
C
- 0% min
- 0,08% max
H
- 0% min
- 0,015% max
Other (each)
- 0% min
- 0,1% max
Other (total)
- —% min
- 0,4% max
Ti
- —
- Balance
Back
Mechanical properties
Rm (MPA)
450
Rp 0,2 (MPA)
380
Density (g/cm3)
4,51
A (%)
18
